{"title":"Henkel - Loctite","description":"\u003ch3\u003e\u003cspan\u003eLOCTITE — kleje i środki techniczne do montażu i konserwacji\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003eLOCTITE to marka rozwiązań stosowanych w przemyśle, warsztatach i serwisie. Jej oferta obejmuje między innymi kleje do zabezpieczania gwintów, kleje błyskawiczne, uszczelniacze do połączeń gwintowych i kołnierzowych, produkty do mocowania części współosiowych oraz środki do naprawy i ochrony powierzchni. Dostępne są także rozwiązania do czyszczenia i zarządzania ciepłem. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eKleje do gwintów pomagają ograniczać samoczynne luzowanie połączeń pod wpływem drgań. W zależności od produktu połączenie może być łatwiejsze lub trudniejsze do późniejszego demontażu. Uszczelniacze gwintów służą do zabezpieczania połączeń rurowych przed wyciekiem cieczy lub gazów, a uszczelniacze kołnierzowe tworzą uszczelnienie między współpracującymi powierzchniami. Produkty do mocowania części mogą pomagać zabezpieczać elementy osadzone na wałach lub w gniazdach przed przemieszczaniem się i zużyciem. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWybór preparatu LOCTITE warto oprzeć na rodzaju połączenia, materiałach, wielkości szczeliny, temperaturze pracy, obciążeniu i wymaganym sposobie demontażu. Przed zastosowaniem należy sprawdzić kartę techniczną oraz zalecenia dotyczące przygotowania powierzchni i czasu utwardzania. Pozwala to dopasować produkt do konkretnego zadania montażowego, naprawczego lub konserwacyjnego.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSprawdź dostępne produkty LOCTITE i wybierz rozwiązanie odpowiednie do swojego zastosowania.\u003c\/span\u003e\u003c\/p\u003e","products":[{"product_id":"loctite-2400-klej-anaerobowy-do-zabezpieczania-gwintow-latwo-demontowalny","title":"Loctite 2400 anaerobic thread locking adhesive with medium disassembly","description":"\u003ch1 class=\"product__titleSpan\" data-mce-fragment=\"1\"\u003eLOCTITE® 2400\u003c\/h1\u003e\n\n\u003ch3\u003e Anaerobic threadlocker - medium disassembly\u003c\/h3\u003e\n\n\u003cp\u003e LOCTITE® 2400 is a medium strength threadlocker that prevents loosening of parts subjected to vibration. It works on all metals and passive substrates.\u003c\/p\u003e\n\n\u003cp\u003e The product cures when isolated from air and placed between tightly fitting metal surfaces. The product prevents\u003cbr data-mce-fragment=\"1\"\u003e loosening of connections and leaks under static and dynamic loads.\u003cbr data-mce-fragment=\"1\"\u003e LOCTITE® 2400™ reduces the run-off of liquid product.\u003c\/p\u003e\n\n\u003ch2\u003e Applications Usage\u003c\/h2\u003e\n\n\u003cp\u003e LOCTITE® 2400™ is designed to lock and seal threaded fasteners where service disassembly with conventional tools is required. \u003cbr\u003eLOCTITE® 2400™ is particularly suitable for less active surfaces such as stainless steel and zinc lamellar (flake) coated or electro-galvanised surfaces where disassembly with hand tools is required.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e threaded connections\u003c\/li\u003e\n\n\u003cli\u003e pump, gearbox or work mounting bolts\u003c\/li\u003e\n\n\u003cli\u003e nuts\u003c\/li\u003e\n\n\u003cli\u003e pegs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Features and Benefits\u003c\/h2\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e does not contain any hazardous substances \"white\" safety data sheet\u003c\/li\u003e\n\n\u003cli\u003e thixotropic properties of the product\u003c\/li\u003e\n\n\u003cli\u003e suitable for surfaces: aluminum, steel, stainless steel, brass\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e WRAS approved (BS 6920): 1104507\u003c\/li\u003e\n\n\u003cli\u003e regular disassembly of parts for inspection is possible\u003c\/li\u003e\n\n\u003cli\u003e prevents self-loosening of parts subjected to vibrations\u003cbr\u003e\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Typical properties\u003c\/h2\u003e\n\n\u003ctable width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Technology\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Acrylic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Compound\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Dimethacrylate ester\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Color Character\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Blue liquid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Fluorescence\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Yes - under the influence of UV light\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Ingredients\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Single component - no mixing required\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Medium, thixotropic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Hardening\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Anaerobic product (in the absence of air)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Hardening - optional\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Activator\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n \u003ctd\u003eApplication\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Thread locking\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Resilience\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e Mean\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Relative density @ 23°C\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e 1,1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, Brookfield - RVT, 25 °C, mPa s (cP):\u003cbr\u003e Spindle 3, speed 20 rpm.\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e 3100\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, cone\/plate, 25 °C, mPa s (cP)\u003cbr\u003e Shear rate 129 s-1\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e 350\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Fixing time\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e 10 mins\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Tightening torque after breakage, M10 black oxidized screws\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e 2.0 N m (20.0 in.\/lb.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Breaking torque, M10 black oxidized screws\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e 20.0 N m (180.0 in.\/lb.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Temperature resistance\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\"\u003e \u003cspan\u003e-55.0 - 150.0 °C\u003c\/span\u003e\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch4\u003e Typical Curing Process\u003c\/h4\u003e\n\n\u003cp\u003e Cure Speed ​​vs. Material Cure speed is dependent on the material used. The graph below shows the time-dependent break strength @ 23°C on M10 steel nuts and bolts compared to other materials. Tests performed in accordance with ISO 10964. \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg style=\"float: none;\" alt=\"loctite-2400-curing-time.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-2400-czas-utwardzania_600x600.jpg?v=1693314280\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e Curing speed depending on gap\u003c\/h4\u003e\n\n \u003cp style=\"text-align: start;\"\u003eThe cure rate is dependent on the gap size. Gaps in threaded joints are dependent on thread type, quality and size. The graph below shows the shear strength developed with time @ 23°C on steel pins and collars at various controlled gaps. Tests performed in accordance with ISO 10123. \u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\"\u003e\u003cimg alt=\"loctite-2400-curing-time-vs-gap.jpg\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-2400-czas-utwardzania-vs-szczelina_600x600.jpg?v=1693314410\"\u003e\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e Curing speed depending on temperature\u003c\/h4\u003e\n\n\u003cp style=\"text-align: start;\"\u003e The cure rate is temperature dependent. The graph below shows the time-dependent fracture strength at different temperatures referenced @ 23°C on M10 steel nuts and bolts. Tests performed in accordance with ISO 10964. \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-2400-czas-utwardzania-vs-temperatura_600x600.jpg?v=1693314558\" alt=\"loctite-2400-curing-time-vs-temperature.jpg\" style=\"float: none;\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e Curing speed depending on activator\u003c\/h4\u003e\n\n \u003cdiv style=\"text-align: start;\"\u003eIf the cure time is too long or if the gaps are too large, the process can be accelerated by applying an activator to the surface first. The graph below shows the break strength developed with time @ 23°C on M10 zinc dichromate coated steel nuts and bolts using\u003cbr\u003e Activator SF 7471™ or SF 7649™. Tests performed in accordance with ISO 10964 \u003c\/div\u003e\n\n\u003cdiv style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-2400-czas-utwardzania-vs-aktywator_600x600.jpg?v=1693314680\" alt=\"loctite-2400-curing-time-vs-activator.jpg\"\u003e\u003c\/div\u003e\n\n\u003ch4\u003e Temperature resistance\u003c\/h4\u003e\n\n\u003cp\u003e The strength tests depending on the temperature are shown in the graph below. \u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e\u003cimg alt=\"loctite-2400-strength-vs-temperature\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-2400-Wytrzymalosc-vs-temperatura_600x600.jpg?v=1693479841\"\u003e\u003c\/h4\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e GENERAL INFORMATION\u003c\/h4\u003e\n\n\u003cp style=\"text-align: start;\"\u003e This product is not recommended for use in pure oxygen and\/or oxygen rich systems and should not be used in systems containing chlorine or other strong oxidizing materials.\u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\"\u003e\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e Installation\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e To achieve the best bonding results, clean all surfaces (external and internal) with LOCTITE® remover and allow to dry.\u003c\/li\u003e\n\n \u003cli\u003eIf cure speed is too slow, use appropriate activator. For reference, see Cure Speed ​​vs. Activator chart. Allow activator to evaporate when necessary.\u003c\/li\u003e\n\n\u003cli\u003e Shake the container before using the product.\u003c\/li\u003e\n\n\u003cli\u003e To prevent clogging of the dispensing nozzle, do not allow the nozzle to come into contact with metal surfaces during application.\u003c\/li\u003e\n\n\u003cli\u003e Through holes: apply a few drops of product to the threads of the bolt where the tightened nut will be located.\u003c\/li\u003e\n\n\u003cli\u003e When filling blind holes, apply a few drops of product to the lower part of the internal thread within one third of the hole height or to the bottom of the blind hole.\u003c\/li\u003e\n\n \u003cli\u003eSealing threads, apply the product around the threads of the external thread, but leave the first thread uncovered. Apply the product so that it completely covers the threads. For larger threads and gaps, you need to use more product and also apply it around the internal thread.\u003c\/li\u003e\n\n\u003cli\u003e Assemble the connector and tighten as required\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Dismantling\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Unscrew the connector using hand tools.\u003c\/li\u003e\n\n\u003cli\u003e If the joint is too strong, heat it (nut or bolt) to a temperature of approx. 250 °C. Unscrew while hot.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Cleaning\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Cured product can be removed using LOCTITE® solvent or by mechanical means such as a wire brush.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Storage\u003c\/h4\u003e\n\n\u003cp\u003e Unless otherwise indicated on the product label, ideal storage conditions are in closed containers in a cool, dry place. Optimum storage temperature: 8 °C to 21 °C.  \u003cbr\u003eStorage at temperatures below 8 °C or above 28 °C may irreversibly change the properties of the product.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\"\u003e\u003c\/div\u003e","brand":"Loctite","offers":[{"title":"50ml","offer_id":47122176344400,"sku":"1947402","price":222.74,"currency_code":"PLN","in_stock":true},{"title":"250ml","offer_id":47122176377168,"sku":"1947403","price":797.22,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/Loctite_2400_250ml.jpg?v=1693315354"},{"product_id":"kopia-loctite-641-klej-anaerobowy","title":"Loctite 641 anaerobic coaxial adhesive with medium release","description":"\u003ch1\u003e LOCTITE® 641\u003c\/h1\u003e\n\n\u003ch3\u003e Anaerobic retaining agent - moderately dismountable adhesive for gluing coaxial parts including bearings on the shaft that prevents them from turning\u003c\/h3\u003e\n\n\u003cp\u003e LOCTITE® 641 is designed to bond coaxial parts and is particularly recommended for applications where subsequent disassembly for inspection is required. The product cures in the absence of air when placed between close-fitting metal surfaces and prevents loosening of joints and leakage caused by shock loads and vibration.\u003c\/p\u003e\n\n\u003cp\u003e Effective for gaps not larger than 0.15mm\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch2\u003e Applications Application\u003c\/h2\u003e\n\n\u003cp\u003e Perfect for parts that will be dismantled in the future, e.g.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e bonding of bearings mounted on shafts and in seats\u003c\/li\u003e\n\n\u003cli\u003e other coaxial connections\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Features and Benefits\u003c\/h2\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e effective protection against loosening of parts exposed to vibrations\u003c\/li\u003e\n\n \u003cli\u003e\u003cspan\u003eIt is perfect for parts that are planned to be dismantled periodically.\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e \u003cspan\u003eone-component - does not require mixing\u003c\/span\u003e\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Typical properties\u003c\/h2\u003e\n\n\u003ctable width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Technology\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e acrylic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Compound\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Dimethacrylate ester\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Color Form\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Yellow liquid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Fluorescence\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e LACK\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Ingredients\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e One-component\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Mean\u003cbr\u003e 600.0 mPa.s (cP)\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Hardening\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Anaerobic product\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Hardening - option\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Activator\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Application\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Coaxial fixing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Resilience\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Mean\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Relative density @ 23°C\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e 1.07\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, Brookfield - RVT, 25 °C, mPa s (cP):\u003cbr\u003e Spindle 2, speed 6 rpm \/ minute\u003cbr\u003e Spindle 2, speed 20 rpm.\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\n\u003cbr\u003e 1215 to 2750\u003cbr\u003e 400-800\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, EN 12092 - MV, 25 °C, after 180 s, mPa s (cP):\u003cbr\u003e Shear rate 277 s-1\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e 90 to 180\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Settling time\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e 20 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e \u003cspan\u003eOperating temperature\u003c\/span\u003e\n\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e \u003cspan\u003e-55.0 - 150.0 °C\u003c\/span\u003e\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e \u003cspan\u003eShear strength, Steel\u003c\/span\u003e\n\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e \u003cspan\u003e12.0N\/mm²\u003cbr\u003e (1700.0psi)\u003c\/span\u003e\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e \u003cspan\u003eAverage curing time at 22 °C.\u003c\/span\u003e\n\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e \u003cspan\u003e24 hours\u003c\/span\u003e\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n \u003ch3\u003eTypical Curing Course\u003c\/h3\u003e\n\n\u003ch4\u003e Curing speed depends on the material\u003c\/h4\u003e\n\n\u003cp\u003e The curing speed depends on the material used. The graph below shows the shear strength developed over time on steel pins and sleeves w\u003cbr data-mce-fragment=\"1\"\u003e compared to other materials, tested according to ISO 10123 \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-czas-utwardzania_600x600.jpg?v=1693395001\" alt=\"loctite-641-cure-time\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-czas-utwardzania_600x600.jpg?v=1693395001\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Curing speed depending on the gap\u003c\/h4\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Cure rate is dependent on gap size Chart below shows shear strength developed over time on steel pins and sleeves\u003cbr\u003e at various controlled gaps; tests according to ISO 10123 \u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-czas-utwardzania-vs-szczelina_600x600.jpg?v=1693395078\" alt=\"loctite-641-curing-time-vs-crevice\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-czas-utwardzania-vs-szczelina_600x600.jpg?v=1693395078\"\u003e\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Cure speed depending on temperature\u003c\/h4\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e The curing speed depends on the ambient temperature. The graph below shows the shear strength developed over time at different temperatures\u003cbr\u003e steel shafts and sleeves tested according to ISO 10123 \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg alt=\"loctite-641-cure-time-vs-temperature\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-czas-utwardzania-vs-temperatura_600x600.jpg?v=1693395155\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Curing speed depending on the activator\u003c\/h4\u003e\n\n \u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003eIf curing takes too long or if there are too large gaps, you can speed up the curing process by applying an activator to the surface beforehand. The graph below shows the shear strength developed with time on zinc dichromate coated steel shafts and sleeves using Activator 7471™ and 7649™, tested per ISO 10123 \u003c\/div\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg alt=\"loctite-641-curing-time-vs-activator\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-czas-utwardzania-vs-aktywator_600x600.jpg?v=1693395258\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/h4\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/h4\u003e\n\n\u003ch4\u003e Temperature strength\u003c\/h4\u003e\n\n\u003cp\u003e Durability tests depending on the temperature are presented in the chart below \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"loctite-641-Strength test depending on temperature\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-641-Wytrzymalosc-vs-temperatura_600x600.jpg?v=1693395542\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e GENERAL INFORMATION\u003c\/h3\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e This product is not recommended for use with pure oxygen and\/or oxygen rich equipment; nor should it be used for installations with chlorine and other materials\u003cbr\u003e strongly oxidizing. \u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Installation\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e For best bonding results, clean all surfaces (exterior and interior) with LOCTITE® remover and let them dry\u003cbr\u003e dry\u003c\/li\u003e\n\n \u003cli\u003eIf material is passive or curing speed is too slow, spray Activator 7471 or 7649 onto surfaces and allow to dry\u003c\/li\u003e\n\n\u003cli\u003e For slip fits, apply the product to the lead-in chamfer on the shaft and inside the sleeve and twist the parts together\u003c\/li\u003e\n\n\u003cli\u003e For press-fit joints, apply the adhesive carefully to both surfaces and press-fit quickly\u003c\/li\u003e\n\n\u003cli\u003e For shrink joints, apply the product to the shaft, heat the sleeve to obtain the possibility of free connection\u003c\/li\u003e\n\n\u003cli\u003e Joint parts should not be fully loaded until full strength is achieved\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Disassembly\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Heat locally to approx. 200 °C. Hot disassemble\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Cleaning\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Cured product can be removed with LOCTITE® solvent\u003cbr\u003e or using mechanical treatment, e.g. with a wire brush\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Storage\u003c\/h4\u003e\n\n \u003cp\u003eUnless otherwise indicated on the product label, the ideal way to store it is to leave it in closed containers in a cool and dry place. Optimum storage temperature: 8 °C to 21 °C.\u003cbr\u003e Storage at temperatures below 8 °C or above 28 °C may irreversibly change the properties of the product. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/div\u003e","brand":"Loctite","offers":[{"title":"50ml","offer_id":47127404511568,"sku":"246676","price":222.56,"currency_code":"PLN","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/Loctite_641_50ml.jpg?v=1693395829"},{"product_id":"loctite-638-klej-anaerobowy-do-czesci-wspolosiowych-trudno-demontowalny","title":"Loctite 638 anaerobic adhesive for cylindrical joints is difficult to remove","description":"\u003ch1\u003e LOCTITE® 638\u003c\/h1\u003e\n\n\u003ch3\u003e Anaerobic fixing adhesive - hard-to-disassemble green, designed for gluing fitted cylindrical joints \u003cspan data-mce-fragment=\"1\"\u003e, in particular with narrow gaps up to 0.25 mm\u003c\/span\u003e\n\n\u003c\/h3\u003e\n\n\u003cp\u003e The product cures when contact with air is cut off when it is placed between tight-fitting metal surfaces and prevents loosening\u003cbr\u003e elements and leakages resulting from dynamic loads and vibrations. LOCTITE® 638™ provides high curing performance. It works not only on active metals (e.g. mild steel) but also on passive substrates such as stainless steel and plated surfaces. The product provides high parameters\u003cbr\u003e high temperature serviceability and tolerance to light oil contamination.\u003c\/p\u003e\n\n \u003cp\u003eSlight contamination of the surface by various oils, e.g. lubricating oils, technological fluids, anti-corrosion and protective fluids, is acceptable.\u003c\/p\u003e\n\n\u003ch2\u003e Applications Application\u003c\/h2\u003e\n\n\u003cp\u003e Perfect for parts that will be dismantled in the future, e.g.\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e embedding rings in housings\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e setting the sleeves on the shafts\u003c\/li\u003e\n\n\u003cli\u003e fastening of gears and pulleys\u003c\/li\u003e\n\n\u003cli\u003e For sliding fit parts\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e other coaxial connections\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Features and Benefits\u003c\/h2\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Tolerates light contamination, including industrial oils\u003c\/li\u003e\n\n\u003cli\u003e High strength on all metals, also on passive substrates (e.g. stainless steel)\u003c\/li\u003e\n\n\u003cli\u003e High temperature resistance\u003c\/li\u003e\n\n\u003cli\u003e It is ideal for fastening to shafts and gears, pulleys and coaxial components\u003c\/li\u003e\n\n\u003cli\u003e Complies with the German DVGW standard (EN 751-1): NG-5146AR0619\u003c\/li\u003e\n\n\u003cli\u003e P1 NSF Reg. No. 123010\u003c\/li\u003e\n\n\u003cli\u003e WRAS (BS 6920) approval: 0511518\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Typical properties\u003c\/h2\u003e\n\n\u003ctable width=\"100%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Technology\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Acrylic\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Compound\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Dimethacrylate ester\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Color Form\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Green liquid\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Fluorescence\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Yes - under the influence of UV light\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n \u003ctd\u003eIngredients\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e One-component\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e High\u003cbr\u003e \u003cspan data-mce-fragment=\"1\"\u003e2500.0 mPa.s (cP)\u003c\/span\u003e\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Hardening\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Anaerobic product\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Hardening - option\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Activator\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Application\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e Coaxial fixing\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Resilience\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e High\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Relative density @ 23°C\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e 1.1\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, Brookfield - RVT, 25 °C, mPa s (cP):\u003cbr\u003e Spindle 2, speed 20 rpm.\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\n\u003cbr\u003e 2500\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Viscosity, cone\/plate, 25 °C, mPa s (cP):\u003cbr\u003e Shear rate 129 s-1\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e 2500\u003cbr\u003e\n\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Settling time\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e 10 minutes\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e \u003cspan\u003eworking temperature\u003c\/span\u003e\n\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e \u003cspan\u003e-55.0 - 180.0 °C\u003c\/span\u003e\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e \u003cspan\u003eShear strength, Steel\u003c\/span\u003e\n\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e \u003cspan\u003e31.0N\/mm² (4500.0psi)\u003c\/span\u003e\n\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e \u003cspan\u003eTime to full strength at 22 °C.\u003cbr\u003e steel\u003cbr\u003e stainless steel\u003cbr\u003e Aluminum\u003c\/span\u003e\n\u003c\/td\u003e\n\n\u003ctd style=\"text-align: center;\" data-mce-style=\"text-align: center;\"\u003e\n\n\u003cbr\u003e 12 hours\u003cbr\u003e 24 hours\u003cbr\u003e 72 hours\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003e Typical Curing Course\u003c\/h3\u003e\n\n\u003ch4\u003e Curing speed depends on the material\u003c\/h4\u003e\n\n\u003cp\u003e The curing speed depends on the material used. The graph below shows the shear strength developed over time on steel pins and sleeves w \u003cbr data-mce-fragment=\"1\"\u003ecompared to other materials, tested according to ISO 10123 \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-638-czas-utwardzania_600x600.jpg?v=1693481655\" alt=\"loctite-638-cure-time\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Curing speed depending on the gap\u003c\/h4\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Cure rate is dependent on gap size Chart below shows shear strength developed over time on steel pins and sleeves\u003cbr\u003e at various controlled gaps; tests according to ISO 10123 \u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-638-czas-utwardzania-vs-szczelina_600x600.jpg?v=1693481732\" alt=\"loctite-638-curing-time-vs-crevice\"\u003e\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Cure speed depending on temperature\u003c\/h4\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e The curing speed depends on the ambient temperature. The graph below shows the shear strength developed over time at different temperatures\u003cbr\u003e steel shafts and sleeves tested according to ISO 10123 \u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-638-czas-utwardzania-vs-temperatura_600x600.jpg?v=1693481806\" alt=\"loctite-638-cure-time-vs-temperature\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Curing speed depending on the activator\u003c\/h4\u003e\n\n \u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003eIf curing takes too long or if there are too large gaps, you can speed up the curing process by applying an activator to the surface beforehand. The graph below shows the shear strength developed with time on zinc dichromate coated steel shafts and sleeves using Activator 7471™ and 7649™, tested per ISO 10123 \u003c\/div\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003cimg alt=\"loctite-638-cure-time-vs-activator\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-638-czas-utwardzania-vs-aktywator_7865fbd4-00f6-4090-9fc9-30411497ae5b_600x600.jpg?v=1693482492\"\u003e\u003c\/div\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/h4\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/h4\u003e\n\n\u003ch4\u003e Temperature strength\u003c\/h4\u003e\n\n\u003cp\u003e Durability tests depending on the temperature are presented in the chart below \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg alt=\"loctite-638-Strength-vs-temperature\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-638-Wytrzymalosc-vs-temperatura_600x600.jpg?v=1693482594\"\u003e\u003c\/p\u003e\n\n\u003ch3\u003e GENERAL INFORMATION\u003c\/h3\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e This product is not recommended for use with pure oxygen and\/or oxygen rich equipment; nor should it be used for installations with chlorine and other materials\u003cbr\u003e strongly oxidizing.\u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Generally, this product is not recommended for plastics (especially thermoplastics that are prone to stress cracking)\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e Installation\u003c\/h4\u003e\n\n\u003col\u003e\n\n \u003cli\u003eFor best bonding results, clean all surfaces (exterior and interior) with LOCTITE® remover and allow to dry.\u003c\/li\u003e\n\n\u003cli\u003e If curing takes too long or if there are too large gaps, you can speed up the curing process by applying an activator to the surface beforehand.\u003c\/li\u003e\n\n\u003cli\u003e For slip fits, apply the product to the lead-in chamfer on the shaft and inside the sleeve and twist the parts together.\u003c\/li\u003e\n\n\u003cli\u003e For press-fit joints, apply the adhesive carefully to both surfaces and press-fit quickly.\u003c\/li\u003e\n\n\u003cli\u003e In the case of hot pressed joints, the fastened parts should be covered with an even layer of the product. If the hub is heated, apply the product to the shaft. If the shaft is to be cooled down before assembly, apply the product to\u003cbr\u003e hub. If heating and cooling are used simultaneously, apply the product to the element to be cooled. Avoid condensation on cooled parts.\u003c\/li\u003e\n\n \u003cli\u003eJoint parts should not be fully loaded until full strength is achieved.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Disassembly\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Unscrew the connector using hand tools.\u003c\/li\u003e\n\n\u003cli\u003e Heat the joint to approximately 250 °C if necessary. Disassemble while hot.\u003c\/li\u003e\n\n\u003cli\u003e If this temperature cannot be reached, heat to as high as possible and use power tools.\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Cleaning\u003c\/h4\u003e\n\n\u003col\u003e\n\n\u003cli\u003e Cured product can be removed with LOCTITE® solvent\u003cbr\u003e or using mechanical treatment, e.g. with a wire brush\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Storage\u003c\/h4\u003e\n\n\u003cp\u003e Unless otherwise indicated on the product label, the ideal way to store it is to leave it in closed containers in a cool and dry place. Optimum storage temperature: 8 °C to 21 °C.\u003cbr\u003e Storage at temperatures below 8 °C or above 28 °C may irreversibly change the properties of the product. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\" data-mce-style=\"text-align: start;\"\u003e\u003c\/div\u003e","brand":"Loctite","offers":[{"title":"250ml","offer_id":47134305288528,"sku":"1803039","price":819.0,"currency_code":"PLN","in_stock":true},{"title":"50ml","offer_id":48687898296656,"sku":null,"price":215.9,"currency_code":"PLN","in_stock":true},{"title":"10ml","offer_id":48687898329424,"sku":null,"price":55.0,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/loctite-638-250ml.png?v=1693483266"},{"product_id":"loctite-268-srodek-do-zabezpieczania-gwintow-nieskapujacy-trudnodemontowalny","title":"Loctite 268 - 19g Stick - Non-drip, difficult to dismantle threadlocking adhesive","description":"\u003ch1\u003e LOCTITE 268 - 15g Stick\u003cbr\u003e\n\n\u003c\/h1\u003e\n\n \u003ch3\u003eA hard-to-break anaerobic threadlocker. It is supplied in \u003cspan style=\"text-decoration: underline;\"\u003ea stick form\u003c\/span\u003e in a non-drip, semi-solid wax consistency. \u003c\/h3\u003e\n\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg style=\"margin-bottom: 16px; float: left;\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/Loctite_268_15g_240x240.png?v=1719488939\" alt=\"loctite-268-hard-to-remove thread pin\"\u003e\u003c\/div\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e Anaerobic adhesive cures in the absence of air when confined between close-fitting metal surfaces. It develops permanent strength and can\u003cbr\u003e be used on a variety of metal substrates. It is particularly well suited for applications where the liquid product may run off the part or may be difficult to apply. It is easy to store and apply,\u003cbr\u003e ensures even surface coverage.\u003c\/p\u003e\n\n\u003ch2\u003e\n\n\u003cbr\u003e\u003cbr\u003e Applications Usage\u003c\/h2\u003e\n\n\u003cul\u003e\u003c\/ul\u003e\n\n\u003cp\u003e Perfect for parts that are subject to vibration and will be dismantled in the future\u003cbr\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e mounting screws\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e nuts\u003c\/li\u003e\n\n\u003cli\u003e threads\u003c\/li\u003e\n\n\u003cli\u003e e.g. stainless steel, aluminum and plated surfaces\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Features and Benefits\u003c\/h2\u003e\n\n\u003cdiv class=\"product__benefitsList\"\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Convenient stick format prevents dripping\u003c\/li\u003e\n\n\u003cli\u003e High strength of the adhesive bond\u003c\/li\u003e\n\n \u003cli\u003ePrevents self-loosening of parts subject to vibration, such as pump, gearbox or press mounting bolts\u003c\/li\u003e\n\n\u003cli\u003e Works on all metals, including passive substrates (e.g. stainless steel, aluminum and plated surfaces)\u003c\/li\u003e\n\n\u003cli\u003e Can be dismantled after heating to 300°C.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/div\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003ch3\u003e PROPERTIES OF UNCURED MATERIAL\u003c\/h3\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Density @ 25 °C 1.03\u003c\/li\u003e\n\n\u003cli\u003e Resting Penetration, ISO 2137, 1\/10 mm 90 to 150\u003c\/li\u003e\n\n\u003cli\u003e Melting point, °C \u0026gt;65\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003e Typical properties\u003c\/h2\u003e\n\n\u003ctable width=\"80%\"\u003e\n\n\u003ctbody\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Fixing time\u003c\/td\u003e\n\n\u003ctd\u003e 5.0 mins\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Color\u003c\/td\u003e\n\n\u003ctd\u003e Red\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Consistency\/appearance\u003c\/td\u003e\n\n\u003ctd\u003e Stick made of semi-plastic mass\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Breakloose torque\u003c\/td\u003e\n\n\u003ctd\u003e 10.0 N m (90.0 in.\/lb.)\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e Application temperature\u003c\/td\u003e\n\n\u003ctd\u003e -65.0 - 300.0 °F (-55.0 - 150.0 °C )\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\u003ctr\u003e\n\n\u003ctd\u003e It is recommended to use with\u003c\/td\u003e\n\n\u003ctd\u003e Metal: Steel, Metal: Steel - Stainless Steel\u003c\/td\u003e\n\n\n\u003c\/tr\u003e\n\n\n\u003c\/tbody\u003e\n\n\n\u003c\/table\u003e\n\n\u003ch3\u003e Technology: Acrylic\u003cbr\u003e Chemical compound: Dimethacrylate ester\u003cbr\u003e Uncured appearance: Red, wax consistency\u003cbr\u003e Form: putty\/filler\u003cbr\u003e Fluorescence: Yes - under the influence of UV light\u003cbr\u003e Ingredients: Single component - does not require\u003cbr\u003e mixing \u003cbr\u003eCuring: Anaerobic product (in the absence of air)\u003cbr\u003e Application: Thread locking\u003cbr\u003e Durability: High\u003c\/h3\u003e\n\n\u003ch3\u003e TYPICAL CURING PROCESS\u003c\/h3\u003e\n\n\u003cp\u003e The curing speed depends on the material used\u003c\/p\u003e\n\n\u003ch3\u003e Curing speed depending on temperature\u003c\/h3\u003e\n\n\u003cp\u003e The curing speed depends on the ambient temperature.\u003c\/p\u003e\n\n\u003ch3\u003e Curing speed depending on activator\u003c\/h3\u003e\n\n\u003cp\u003e When the cure speed is unacceptably slow due to large gaps, the application of an activator to the surface may improve it. However, this may reduce\u003cbr\u003e the ultimate strength of the joint and therefore it is recommended to carry out tests.\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003ch3\u003e GENERAL INFORMATION\u003c\/h3\u003e\n\n\u003cp style=\"text-align: start;\"\u003e This product is not recommended for use in pure oxygen and\/or oxygen rich systems and should not be used in systems with chlorine or other materials\u003cbr\u003e strongly oxidizing.\u003c\/p\u003e\n\n\u003cp style=\"text-align: start;\"\u003e This product is generally not recommended for use on plastics (especially thermoplastics which are prone to stress cracking)\u003c\/p\u003e\n\n\u003ch4 style=\"text-align: start;\"\u003e Installation\u003c\/h4\u003e\n\n\u003col\u003e\n\n \u003cli\u003eTo achieve the best bonding results, clean all surfaces (external and internal) with LOCTITE® remover and allow them to dry.\u003cbr\u003e dry.\u003c\/li\u003e\n\n\u003cli\u003e Only apply as much product as needed for application.\u003c\/li\u003e\n\n\u003cli\u003e Any skin that may have formed on the product should be removed.\u003c\/li\u003e\n\n\u003cli\u003e Apply enough product to fill the thread where the cap will be screwed on.\u003c\/li\u003e\n\n\u003cli\u003e Close the packaging after use.\u003c\/li\u003e\n\n\u003cli\u003e Assemble the connector and tighten as required.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ol\u003e\n\n\u003ch4\u003e Dismantling\u003c\/h4\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e When hand tools are not sufficient due to elongated types of joints or their larger diameters (over 1\"), they should be heated locally to approx. 250\u003cbr\u003e °C and dismantle while hot.\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch4\u003e Cleaning\u003c\/h4\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e Cured product can be removed using LOCTITE® solvent.\u003cbr\u003e or by mechanical means, e.g. with a wire brush\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch4\u003e Storage\u003c\/h4\u003e\n\n \u003cp\u003eUnless otherwise indicated on the product label, the ideal way to store it is in closed containers in a cool, dry place.\u003c\/p\u003e\n\n\u003cp\u003e Optimum storage temperature: +8°C to +21°C.\u003c\/p\u003e\n\n\u003cp\u003e Storage at temperatures below +8°C or above +28°C may irreversibly change the properties of the product.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cdiv style=\"text-align: start;\"\u003e\u003cbr\u003e\u003c\/div\u003e","brand":"Loctite","offers":[{"title":"Default Title","offer_id":48779521786192,"sku":"1709318","price":87.0,"currency_code":"PLN","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0557\/3653\/3049\/files\/Loctite_268_15g.png?v=1719488939"}],"url":"https:\/\/lubricants-shop.eu\/collections\/henkel-loctite.oembed","provider":"sklepsmary.pl","version":"1.0","type":"link"}