ROCOL METAL REPAIR Compound - fast epoxy glue for metal putty 4 minutes 56g

Name: ROCOL METAL REPAIR Compound - fast epoxy glue for metal putty 4 minutes 56g
Brand: ROCOL
SKU: 64012
Price: 76.65 PLN
Availability: InStock

76,65 zl PLN 94,28 zl PLN Save 17,63 zl PLN

Tax includedShipping calculated at checkout

Only 20 left!

Cechy szczególne: Dobra ochrona przed korozją, Dobra przyczepność do wielu podłoży, Klej/uszczelniacz dwuskładnikowy

Przemysł: Obróbka i produkcja metali

Typ produktu: Klej epoksydowy, Wyprzedaż

Wysoka temperatura: +131°C do 150°C, Wysoka temperatura i stopy

Zastosowanie: Chemiczne żrące środowisko, Gwinty i połączenia gwintowane, Hydraulika, Kleje, Wielozadaniowe, Wysoka temperatura i stopy

ROCOL METAL REPAIR COMPOUND

Fast 4-minute epoxy glue - solvent-free putty containing stainless steel metal fillers

ROCOL® METAL REPAIR is a steel reinforced epoxy putty containing stainless metal fillers for use as a solvent-free repair agent throughout the industry.

Can be used underwater

ROCOL METAL REPAIR Compound is a durable repair compound that bonds to a wide range of substrates, including various metals, and is ideal for filling cracks, etc.

Application:

metal glue
gluing ferrous metals, aluminum and other metal substrates.
casting repairs,
gluing valve and pump elements,
regeneration of shafts, keyways,
gluing bearings, pipes, flanges,
adhesive for tanks, housings or any cracked, damaged or worn equipment.

Features and Benefits:

ROCOL METAL REPAIR glue has a wide temperature range from -40°C to +150°C.
It is simple and convenient to use and adheres to most metal substrates.
resistant to hydrocarbons, ketones, alcohols, esters, halocarbons, aqueous salt solutions, diluted acids and substances.
Can be used underwater
Lasts for 5-10 minutes, is ready to use after 60 minutes, and is fully cured after 24 hours.

Technical data, parameters of Rocol Metal Repair glue

Property	Test method	Result
Appearance	Visual	Gray putty
Base type	ON	Epoxy resin
Solids	ON	Stainless steel metal fillers
Shore D hardness	80
Compressive strength	80N/mm2
Dielectric strength	300V/mm
Electrical resistance	30,000 MΩ
Shear strength on steel	6.2 N/mm2
Filling volume per 56g stick	ON	About 34 cm3
APPLICATION FEATURES:
Temperature range	+4°C to +43°C (during application)
Working time	3 minutes at 20°C
Initial setting	ON	5-10 minutes
Service life	ON	60 minutes at 20°C
Full hardening	24 hours at 20°C
PROPERTIES AFTER COMPLETELY CURING:
Temperature range: Continuous use	ON	-40°C to +120°C (after curing)
Temperature Range: Intermittent Use	ON	-40°C to +150°C (after curing)

Tips for storage and use

Surfaces should be clean and free from oil, grease, dust and dirt. Adhesion will be improved if the surface is roughened.
Wear lightweight disposable gloves. Break or cut off the required amount. Use at least 1/4 stick for best results.
Turn and knead until uniform in texture and color. A little heat may be felt.
Do not knead the dough for more than two minutes and then immediately apply it to the substrates, rubbing it into the cracks or holes to be filled.
Remove excess material before it hardens. This can be done with a tool moistened with clean water.
On wet or damp surfaces, the compound should be rubbed firmly into the application area and held in place until adhesion begins. The compound should not be held in place by hand as heat is generated during the curing process.
The compound will begin to harden after 5-10 minutes.
The service life is reached after 60 minutes and the mass can then be drilled, sanded, tapped, threaded or filed. Full cure will be achieved after 24 hours.
Storage temperature should be controlled between +8°C and +28°C.
The shelf life is 1 year from the date of production.