DOWSIL 7091 Silicone adhesive

70,06 zl PLN

Tax includedShipping calculated at checkout

Only 5 left!

dowsil 7091 neutral silicone
white
Black

Cechy szczególne: Dobra przyczepność do wielu podłoży, Klej/uszczelniacz jednoskładnikowy, Utwardzanie Alkoxy (Neutralny))

Niska temperatura: od -31°C do -50°C

Norma: EN 45545-2

Pojemność opakowania: 310ml

Wysoka temperatura: +151°C do 200°C

Zastosowanie: Wielozadaniowe

DOWSIL™ 7091 Adhesive Sealant - 310ml

Silicone sealant adhesive, high performance, neutral curing


Application:

  • Designed for applications that require a strong but flexible bond, such as joining materials with different coefficients of thermal expansion, e.g. glass to metal or glass to plastic
  • Primerless adhesion to common materials including enamelled and painted steel, aluminium, ceramics and glass as well as some plastics used in engineering applications
  • Used as material for molded in place gasket (FIPG)
  • Used in engine systems

Features and Benefits:

  • One component adhesive/sealant
  • Cures at room temperature under the influence of atmospheric moisture
  • Alkoxy curing system
  • Non-settling, pasty consistency
  • Easy to apply
  • Cures to hard, flexible rubber
  • Excellent adhesion to many substrates
  • Stable and flexible from -40°C (-40°F) to 180°C (356°F)
  • Approved to rail standard EN 45545-2, HL1(R22), HL2(R23, HL3(R24)

Typical Properties

    • Adhesion to Acrylic, Acrylonitrile Butadiene Styrene (ABS), Aluminum, Copper, Glass, Nylon 6/6, Polycarbonate, Steel, Galvanized, Steel, Low Carbon, Steel, Stainless Steel
    • Color Black, grey, white
    • Durometer - Shore A 37
    • 680% elongation
    • Shelf life 360 ​​days
    • Center of gravity 1.4 at 25°C
    • Breaking strength 86 ppi
    • 363 psi tensile strength

    Processing and formulation benefits

      • Type of hardening: alkoxy
      • Number of parts: One-component sealant

    Durability and Storage

    When stored at or below 30°C (86°F) in the original, unopened containers, this product has: a shelf life of 12 months from the date of manufacture.

    How to use

    Substrate preparation

    All surfaces must be clean and dry. Degrease and wash off any impurities that may: impair adhesion. Suitable solvents include isopropyl alcohol, acetone or methyl ethyl ketone.

    Good unprimed adhesion can be achieved on a variety of substrates including enamelled and painted steel, aluminium, ceramics, glass and some plastics.
    Substrates to which good adhesion is not usually obtained include PTFE, polyethylene, polypropylene and related materials.

    DOWSIL™ 1200 OS Primer is recommended for maximum adhesion. Apply a thin layer of primer by dipping, brushing or spraying. Allow the primer to dry for 15 to 90 minutes at room temperature and a relative humidity of 50% or higher.

    Method of application

    Apply a coat of DOWSIL™ 7091 Adhesive Sealant to one of the prepared surfaces, then quickly coat with the second bonded substrate.
    After exposure to moisture, the freshly applied material "skin" after about 10-15
    minutes at room temperature and 50% relative humidity. All tooling should be completed before this skin forms. The surface is easily treated with a spatula. The adhesive/sealant will dry in approximately 30 minutes.

    Curing time

    Once the skin is formed, curing continues inward from the surface. In 24 hours. DOWSIL™ 7091 Adhesive Sealant will cure to a depth of approximately 2mm. Curing time will be longer at lower humidity levels and with very deep joint sections. Before transporting and packing glued components, it is recommended that users wait a sufficient amount of time to ensure that the integrity of the adhesive is not compromised.