OKS 1361 - Spray 400ml Silicone release agent
Colorless release agent and lubricant based on silicone.
Application
- Parting agent for casting, injection molding, blow molding and extrusion of plastics and elastomers
- It prevents the adhesion of e.g. excess adhesives and sealants
- Eliminates squeaking and squeaking when rubbing surfaces made of plastics, elastomers and metals
- Facilitates pulling in plastic and rubber profiles, e.g. when installing doors and windows
-
Lubricant for the cutting edges of paper machines, cartoners, veneer and textile machines, etc.
- industries:
- Food industry
- Shipbuilding and marine engineering
- Construction of machines (machine tools) and devices
- Processing of rubber and plastics
- Paper and packaging industry
- Chemical industry
- Glass and foundry industry
- municipal technology
- Maintenance and upkeep
- Metallurgical industry
- Logistics
- Railway technology
Features and benefits
- NSF H1 Registration
- High efficiency due to above-average wetting
- surface and creating separating membranes with properties
antistatic - Versatile for long-term lubrication, protection, care and impregnation of metal, plastic and rubber material surfaces
- Minimal consumption due to the formation of extremely thin films
- Water and weather resistance
- Long spray tube for precise application
- Does not contain MOSH/MOAH ( long-chain impurities and aromatic hydrocarbons contained in mineral oil)
Technical parameters
Standard | Condition | unit | Value | |
Composition | ||||
base oil | Polydimethylsiloxane | |||
Technical data | ||||
Viscosity (at 25°C) | DIN 51 562-1 | mm²/sec | 350 | |
Solidification temperature | DIN ISO 3016 | 3°C steps | °C | -55 |
Flash-point | DIN ISO 2592 | > 79 | °C | > 300 |
Lower operating temperature | °C | -50 | ||
Upper operating temperature | °C | 200 | ||
Color | colorless | |||
Density (at 20°C) | DIN EN ISO 3838 | g/cm³ | 0.97 | |
Admission | ||||
Approval for use in food technology | NSF H1, Reg.-No. 129481 |
Usage
Surfaces must be cleaned for optimal performance. Spray evenly thin layer. Avoid excesses.
Note: Only mix with suitable lubricants. Silicone-based plastics, such as silicone rubber, can be separated by silicone oil. Silicone must not be used for sliding areas under pure oxygen.
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor