Molykote HP-870
Synthetic (PFPE) heat and chemical resistant grease that operates under extremely high loads and in vacuum.
Description
Molykote HP-870 Grease is a fully fluorinated PTFE thickened grease that provides exceptional performance under extreme conditions. It has excellent stability at high temperatures and excellent resistance to chemicals and solvents.
Working temperature
Apps
HP-870 grease can be widely used under conditions such as low or high temperature, corrosive, solvent, liquefied natural gases, high vacuum, etc.
This grease is ideal for use in clean rooms, semiconductor manufacturing equipment, cardboard manufacturing equipment, hot air dryer motor axles, etc. where lubricant evaporation can be problematic.
- Bearings for ovens in the food industry (no contact with food)
- High-temperature aggregates for office and printing equipment, in particular thermal aggregates for laser printers, bearings for heating rolls of laminators, etc.
- Crimped bearings for equipment operating at high temperatures
- Bearings of pressure rollers and gluing edgebanders in the furniture industry
- Bearings for injection molding machines and extruders
- Bearings, seals and other vacuum system assemblies
- Pump bearings for pumping chemically aggressive media
- Oil extraction screw shaft bearings
- Friction units of clean room equipment in the electronics industry, semiconductor manufacturing where lubricant evaporation is undesirable
- Gaskets
- Open and closed gears
- Sheathed control cables
Features and Benefits
- Heat resistance
- Very high load capacity
- Resistance to chemically aggressive environments
- Working in a humid environment
- High anti-corrosion properties
- Resistant to washing out with water
- Long service life
- No dropping point - lubricant does not melt or flow when heated
- Compatible with most plastics and rubber
PROBLEMS SOLVED BY THE MATERIAL
- Dust ingress into the closed lubrication unit and abrasive wear
- Corrosion
- Washing out the grease
- Destruction of the lubricant under the influence of chemically aggressive media
- Loss of lubrication capacity under vacuum conditions
- Frequent relubrication
- Deformation and destruction of plastic and rubber parts
Index | Unit | Result |
---|---|---|
Color | white | |
base oil | Perfluoropolyether (PFPE) | |
Thickener | Fluorinated polymer thickener (PTFE) | |
Anti-friction additives (fillers) | Polytetrafluoroethylene (PTFE) | |
Accessories | Corrosion inhibitor | |
Operating temperature range | °C | from -20 to +250 |
Base oil kinematic viscosity at 25°C | mm 2 / sec | 1500 |
Mixed grease penetration (60 cycles) | mm / 10 | 280 |
NLGI Cohesion Class | 2 | |
Density at 20 ° С | g / cm 3 | 2 |
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor
19,99 zl PLN | 24,99 zl PLN
Product title
Vendor